Introduction
This guide shows how to install Expansion Cards into your Framework Laptop 16. No tools are required to change the ports on your Framework Laptop 16, but you should pay close attention to this guide when choosing which cards to install in which slot, since not all cards will work in every slot.
-
-
Before inserting Expansion Cards, make sure that the Expansion Card Latches are open, these will appear red/orange when open and light grey when closed.
-
-
-
Install the Expansion Cards as shown and once all are in place, close the Expansion Card Latches.
-
Note that some Expansion Cards only function in certain slots, so please make sure to reference this article when choosing which slots to use.
-
Cancel: I did not complete this guide.
7 other people completed this guide.
2 Comments
@squid there are a few questions in the comments on the step 2 "Insert the Expansion Cards". I also have a question about the whole thing in this other comment. could you maybe look into answering these?
Screech McDuck - Open Reply
Can all of the expansion cards be swapped while the laptop is turned on?
Screech McDuck - Open Reply
