Skip to main content

12th Gen BIOS and Drivers

Minor Versionm

by Nirav Patel

Introduction

How exciting, you finally got your hands on a Framework Laptop! This guide will walk you through each step from unboxing to powering on your laptop so you can start using it right away. As with all our guides, make sure you read the directions in each step and view the images before starting.

  1. Unbox your Framework Laptop. Hold off on powering it on until you complete the rest of the guide.
    • Unbox your Framework Laptop. Hold off on powering it on until you complete the rest of the guide.

  2. Locate the Framework Screwdriver in the package underneath the Framework Laptop and keep it handy - it's the only tool you'll need replace or upgrade any part of the product!
    • Locate the Framework Screwdriver in the package underneath the Framework Laptop and keep it handy - it's the only tool you'll need replace or upgrade any part of the product!

  3. After unboxing it, assemble the Power Adapter.  Connect the AC cable and the USB-C cable to the Power Adapter body.
    • After unboxing it, assemble the Power Adapter. Connect the AC cable and the USB-C cable to the Power Adapter body.

    • You can plug the USB-C cable in from either end of the cable. Choose whether you want the right angle connector plugged into the adapter or into your laptop.

  4. Insert the Expansion Cards of your choice into any of the empty bays. Slide the Expansion card into the bay, pushing until it clicks.
    • Insert the Expansion Cards of your choice into any of the empty bays.

    • Slide the Expansion card into the bay, pushing until it clicks.

    • The first few times you insert or remove a card, it'll take a little more force.

    • Connect the USB-C cable from the Power Adapter into the USB-C Expansion Card. Connect the AC Cable to a power source.

    • The Framework Laptop ships in a mode where the battery is disabled until power is first plugged in, so you really do have to plug in power at this step!

  5. Turn the Framework Laptop over and open it.
    • Turn the Framework Laptop over and open it.

    • Power on the laptop by pressing the power button, and get ready to start using your Framework Laptop!

    • The first boot may take a bit longer (10-30 seconds) while the system recalibrates the installed memory.

  6. Follow the on-screen instructions to set up Windows and log in.
    • Follow the on-screen instructions to set up Windows and log in.

    • Once you are set up, make sure to run Windows Update to get the latest security and functionality updates from Microsoft.

    • We also recommend updating to the latest BIOS and Drivers (11th Gen Intel Core or 12th Gen Intel Core) for the Framework Laptop to make sure the system runs optimally.

Conclusion
  • To purchase a Framework Laptop visit the Framework website
  • Want to learn more about the Framework Laptop? Take a look at our blog
  • If you have any questions or concerns, feel free to reach out to Framework Support

36 other people completed this guide.

Nirav Patel

Member since: 03/24/2021

21 Guides authored

Team

Framework Member of Framework

Community

7 Members

25 Guides authored

6 Comments

Where do I find the driver packages and bios updates?

WACOMalt - Reply

I have a question the same specs with this one on the diy cost more (I mean all of the stuff) can you fix that

Deltawastaken - Reply

Also I mean the cheapest non diy

Deltawastaken -

I forgot to get a USB-C expansion card, but I do have USB-A. Can I charge the laptop with a USB-A connection?

Chad C - Reply

Add Comment

View Statistics:

Past 24 Hours: 35

Past 7 Days: 281

Past 30 Days: 1,392

All Time: 14,828