Be careful when installing the mainboard at the ends of the heatpipes. The ends are slightly under tension towards the inside. It is possible that the ventilation plate cannot be inserted correctly if the heatpipes are not at the bottom of the housing. If this is the case: The mainboard is inserted and the heatpipes are then pulled outwards very slightly and the mainboard then sinks all the way down.
When the upper SSD is installed, a plastic cover on the mainboard can get in the way. I removed the cover and only stuck it back on after I had installed the SSD. Otherwise, the SSD may be too high and the center plate may not sit properly.
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
Be careful when installing the mainboard at the ends of the heatpipes. The ends are slightly under tension towards the inside. It is possible that the ventilation plate cannot be inserted correctly if the heatpipes are not at the bottom of the housing. If this is the case: The mainboard is inserted and the heatpipes are then pulled outwards very slightly and the mainboard then sinks all the way down.
When the upper SSD is installed, a plastic cover on the mainboard can get in the way. I removed the cover and only stuck it back on after I had installed the SSD. Otherwise, the SSD may be too high and the center plate may not sit properly.