Same. I had to wait for the battery to fully charge to be able to see the POST blink codes on the side LEDs. POST failed on DDR init.
My setup has a single 32GB SODIMM in the channel 0 (right) slot. Tried resetting the board and reseating the SODIMM after blowing out eh socket with no success.
What finally worked was moving the SODIMM to channel 1 (left slot), letting it boot, then back to channel 0 (right slot), after which the system has been fine. I suspect the memory training failed and switching slots around forced a reset of that. Dunno.
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
Same. I had to wait for the battery to fully charge to be able to see the POST blink codes on the side LEDs. POST failed on DDR init.
My setup has a single 32GB SODIMM in the channel 0 (right) slot. Tried resetting the board and reseating the SODIMM after blowing out eh socket with no success.
What finally worked was moving the SODIMM to channel 1 (left slot), letting it boot, then back to channel 0 (right slot), after which the system has been fine. I suspect the memory training failed and switching slots around forced a reset of that. Dunno.