I agree with the other commenter – the screen is perfectly readable even at the lowest brightness (in fact, I keep it on the first or second brightness step for the vast majority of the time and very rarely need to go above that).
Kinda obvious in hindsight, but both the thick part of the cable (that goes next to the hinge) and the grounding tape are sticky, and they have their sticky surfaces covered by protective paper that needs to be removed first. I spent a couple of seconds wondering why the grounding tape would not stick in place...
I agree with the other commenter – the screen is perfectly readable even at the lowest brightness (in fact, I keep it on the first or second brightness step for the vast majority of the time and very rarely need to go above that).
Kinda obvious in hindsight, but both the thick part of the cable (that goes next to the hinge) and the grounding tape are sticky, and they have their sticky surfaces covered by protective paper that needs to be removed first. I spent a couple of seconds wondering why the grounding tape would not stick in place...
Interestingly, mine (Framework 13 AMD) doesn’t seem to have this peg at all.
There is no third image... or any image actually...