fix typo

Minor Versionm

by Nirav Patel

Unscrew and Remove Battery

Written By: Sandy Qualey-Dobson (and one other contributor)
  • Comments: 0
  • Favorites: 0

Difficulty

Easy

Steps

2

Time Required

00:03:00 - 00:06:00

Sections

1

Flags

1

Prerequisite Only

Prerequisite Only

This guide is only used as a prerequisite for other guides and is not a complete or useful guide when viewed independently.

  1. Using the T5 bit in the Framework Screwdriver, unscrew the three fasteners on the battery.

    • Using the T5 bit in the Framework Screwdriver, unscrew the three fasteners on the battery.

    • Note: The screws will come loose after a few revolutions however they will remain attached to the battery.

  2. Use your finger tips to gently lift the battery up and away from the bottom cover. Carefully lift it out and keep it in a safe place. Warning: Handle the battery by the plastic frame, make sure not to bend, scratch, cut, or puncture it, and keep it away from heat sources

    • Use your finger tips to gently lift the battery up and away from the bottom cover. Carefully lift it out and keep it in a safe place.

    • Warning: Handle the battery by the plastic frame, make sure not to bend, scratch, cut, or puncture it, and keep it away from heat sources

Finish Line

Author

with 1 other contributor

Sandy Qualey-Dobson

Member since: 07/19/2022

38 Guides authored

Team

Framework Member of Framework

6 Members

63 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 29