Skip to main content

fix typo

Minor Versionm

by Nirav Patel

  1. Using the T5 bit in the Framework Screwdriver, unscrew the three fasteners on the battery.
    • Using the T5 bit in the Framework Screwdriver, unscrew the three fasteners on the battery.

    • Note: The screws will come loose after a few revolutions however they will remain attached to the battery.

  2. Use your finger tips to gently lift the battery up and away from the bottom cover.  Carefully lift it out and keep it in a safe place. Warning: Handle the battery by the plastic frame, make sure not to bend, scratch, cut, or puncture it, and keep it away from heat sources
    • Use your finger tips to gently lift the battery up and away from the bottom cover. Carefully lift it out and keep it in a safe place.

    • Warning: Handle the battery by the plastic frame, make sure not to bend, scratch, cut, or puncture it, and keep it away from heat sources

Finish Line

Sandy Qualey-Dobson

Member since: 07/19/2022

54 Guides authored

Team

Framework Member of Framework

7 Members

81 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 30