Introduction
Did you lose a screw in your Framework Desktop? Fear not! Follow this guide to replace your missing screws with the Framework Desktop Fastener Kit.
Parts
No parts specified.
-
-
The Fastener Kit contains the following:
-
Four screws labeled "6.0 mm fastener with a 7.3 mm diameter 2.3 mm thick"
-
Two large screws labeled "M6 ring screws"
-
Four screws labeled "4.0 mm fastener with a 5.5 mm diameter 2.0 mm thick"
-
Eight screws labeled "4.0 mm fastener with a 5.5 mm diameter 0.9 mm thick"
-
Four long screws labeled "26.5 mm fastener with a 7.0 mm diameter 2.0 mm thick"
-
Your Framework Desktop comes with a spare screw of each size attached to the bottom of the top plate. You can use the Fastener Kit to replenish any screws you used there.
-
Not included in the Fastener Kit is a silver 4.5 mm‑long T5 Torx screw that secures the SSD covers, I/O shield, and USB‑C brackets.
-
-
-
The two screws labeled "M6 ring screws" secure the Top Panel.
-
-
-
The long screws labeled "26.5 mm fastener with a 7.0 mm diameter 2.0 mm thick" secure the Fan.
-
-
-
The screws labeled "6.0 mm fastener with a 7.3 mm diameter 2.3 mm thick" secure the Mainboard.
-
-
-
The screws labeled "4.0 mm fastener with a 5.5 mm diameter 2.0 mm thick" secure the power supply.
-
-
-
The screws labeled "4.0 mm fastener with a 5.5 mm diameter 0.9 mm thick" secure the top plate.
-
-
-
The screws labeled "4.0 mm fastener with a 5.5 mm diameter 0.9 mm thick" secure the rear plate.
-
-
-
The screws labeled "4.0 mm fastener with a 5.5 mm diameter 0.9 mm thick" secure the side of the power supply.
-
-
-
The screws labeled "4.0 mm fastener with a 5.5 mm diameter 2.0 mm thick" secure the power supply.
-
If you need help, contact Framework support.
If you need help, contact Framework support.
