Skip to main content

slight wording change of prerequisite steps

Minor Versionm

by Sandy Qualey-Dobson

  1. Disconnect the Touchpad Cable from the Mainboard by inserting your finger into the loop and pull directly upward using a slight amount of force. Avoid disconnecting the Touchpad side of the cable unless you need to replace the Touchpad Cable itself, since that connector is more fragile. Once the Touchpad Cable is disconnected, remove the Input Cover away from the Mainboard.
    • Disconnect the Touchpad Cable from the Mainboard by inserting your finger into the loop and pull directly upward using a slight amount of force.

    • Avoid disconnecting the Touchpad side of the cable unless you need to replace the Touchpad Cable itself, since that connector is more fragile.

    • Once the Touchpad Cable is disconnected, remove the Input Cover away from the Mainboard.

    • The Input Cover is now fully disconnected from the Bottom Cover and can be set aside.

Finish Line

Sandy Qualey-Dobson

Member since: 07/19/2022

54 Guides authored

Team

Framework Member of Framework

7 Members

84 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 19